Car Alarm Central Locking Remote Security Tilt + Shock Sensor 2-way Fobs Ca1355

Car Alarm Central Locking Remote Security Tilt + Shock Sensor 2-way Fobs Ca1355
Car Alarm Central Locking Remote Security Tilt + Shock Sensor 2-way Fobs Ca1355
Car Alarm Central Locking Remote Security Tilt + Shock Sensor 2-way Fobs Ca1355

Car Alarm Central Locking Remote Security Tilt + Shock Sensor 2-way Fobs Ca1355

Secure your vehicle The Elite CA1355E two-way LED confirming security system is anything but average. It's Packed with features and includes an on-board digital tilt/shock sensor and on-board relays for door lock/unlock. 2 x 4-button One-Way Remote Control 4180064 Antenna 4120388 Antenna Harness On-Board Digital Tilt & Dual Shock Sensor.

Dual Stage Shock Detection (Lite Touch - Full Trigger) 2,500 ft. Range Silent Choice Glass Mount Antenna with Built-in LED Light and Valet Switch 125dB Weatherproof Siren RPS (Real Panic Sound) Horn Output Starter Interrupt Output with Relay Included Hijack mode Starter interrupt. Package includes Main Module with built in. 2 x remote controls with 4-buttons Override switch User manual. Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the button.

The parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second. NOTE: The system is equipped with a feature called Silent Choice. If enabled, the system requires a second press of the button to activate an audible arming response from the vehicle. Passive Arming Bypass If passive arming is enabled on your system, while the system is disarmed, press +, the system will respond with 1 chirp and the LED will turn on.

The security system will remain in this temporally bypassed state for as long as you wish. To exit passive bypass, press the or button and the system will return to normal status. Bypassing The Shock Sensor To arm the system and ignore the shock sensor press button, then within 5 seconds press +, the system will respond with 1 long chirp. NOTE: The system will only change the shock sensor setting for one arm cycle and will be defaulted back to normal operation the next time the system is armed.

Hidden Alarm Function Press the button first, within 3 seconds press the button to activate the hidden alarm function. The security system will arm with "Hidden Alarm Function" in which the siren / horn will be silenced if the system is triggered. Disarming the Security System To disarm the system press the button. The parking lights will flash 1 time, indicating the system is disarmed and has unlocked the doors (if equipped and connected).

If enabled, the system requires a second press of the button to activate an audible disarming response from the vehicle. If your system is set up for 2 step unlock, a third press of unlock will activate the audible response. Two Stage Door Unlock (Optional) If this feature is enabled on your system, pressing the button one time will unlock only the driver's door. Press again within three seconds to unlock the remaining doors. Activating the Trunk Release Feature (Optional) If this feature is enabled on your system, pressing and holding the button for 3 seconds will open the vehicle's trunk or hatch.

Activating the AUX 1 Output (Optional) If this feature is enabled on your system, pressing the and buttons simultaneously will activate an optional feature. This feature can be programmed for a wide range of functions like power window or sunroof automation, please consult your installing dealer to determine the functionality of your system. Entering AUX Mode and Activating the Additional AUX 2 - 5 Outputs (Optional) To access the additional AUX outputs, AUX 2, AUX 3, AUX 4, and AUX 5, you must first enter the transmitters AUX Mode. This will "shift" the functions of the transmitter buttons from their standard operation to control of the AUX outputs. AUX Mode - 4 button transmitter: Press and Hold and for 2 seconds, the transmitter LED will flash 1 time.

AUX Mode will remain active for 15 seconds. AUX Mode will exit after 15 seconds of inactivity or by pressing and again for 2 seconds, the transmitter LED will flash 2 times to confirm exit. Activating outputs while in AUX Mode: AUX 2: Press and Hold for 3 seconds. AUX 3: Press and Hold for 3 seconds.

AUX 4: Press and Hold for 3 seconds. AUX 5: Press and Hold for 3 seconds. Using the Progressive Car Finder Feature Press the button to locate your vehicle. The system will flash the parking lights and sound 5 times at low volume, increasing in volume each time the button is pressed. Using the Personal Protection Alarm (Panic) Press and hold the button for 3 seconds to activate the personal protection alarm.

During panic mode, the normal function of the transmitter buttons will be suspended. The transmitter's and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds. Programmed Transmitter Notification As a security precaution each time the vehicle's ignition is turn on the status LED light with flash the number of transmitters programmed into the system. This helps to identify unauthorized transmitters from accessing your vehicle. If you believe an unauthorized transmitter has been programmed to your system, contact your installing dealer for assistance. Valet Mode When valet mode is activated the status LED will light solid, and all security functions will be disabled. To enter or exit valet mode simply follow the steps outlined below: 1. Turn the vehicle's ignition ON.

Push and hold the programming/valet button. The LED will turn on solid when valet mode is active 4. User Selectable Notification Chirps System ARM/DISARM chirps can be toggled ON or OFF without entering the programming feature banks. Turn the ignition ON then OFF.

Press and release the valet/programming button 3 times. The system will respond with 1 chirp for ON or 2 chirps for OFF. User Selectable LED This feature will control whether the LED is ON or OFF when the system is Armed/ Locked and can be toggled ON or OFF without entering the programming feature banks. Turn the ignition ON, OFF, ON, OFF. Manually Overriding the Security System Your system can be disarmed without the use of the transmitter.

This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. To by-pass the alarm system; 1. Turn the ignition key to the ON position.

Within 10 seconds, press and release the valet push button switch. The alarm system will stop sounding and enter the (by-passed) mode. You can now start and operate the vehicle normally. Carjack Mode (Anti-Hijack Mode) This feature must be turned on in system programming, please consult your installing dealer.

Triggering Carjack mode: While the ignition is ON and press and hold + for 2 seconds, the parking lights will flash 1 time and the system will act as follows; 1. 50 seconds after being triggered the siren will chirp for 15 seconds, during this 15 seconds you will be alerted to push the valet button to turn off Carjack mode. If Carjack mode is not turned off at this time it will advance to the next step. Following the 15 second chirps (total time now 65 seconds) the siren will go into full sound and the parking lights will start flashing. 90 seconds after trigger in, addition to the siren and parking lights, the system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS STATE UNTIL THE BATTERY IS DEPLETED. OVERRIDE THE SYSTEM TO TURN OFF CARJACK MODE: Turn the ignition OFF then On and press the valet button within 10 seconds. These items are brand new and required skilled/professional installation.
Car Alarm Central Locking Remote Security Tilt + Shock Sensor 2-way Fobs Ca1355